Application Engineering | Standard Controllers | Packaged Controllers
Lighting Systems | Tenant Override and Billing System | Accessories
Application Engineering
We provide complete application engineering services and panel assembly for the convenience of dealers and installation contractors. The UL listed panels are completely programmed and tested at the factory to facilitate easy installation and start-up.
BASYX Standard Product Catalog
Accurate and consistent control of building operations are essential for energy savings through building automation. We manufacture a complete line of affordable products and provide services to properly monitor and control your facility.
BCS BASYX PSC
The BASYX PSC controller is an inexpensive stand-alone controller which can be incorporated into a full direct digital system. The unit provides basic time-of-day scheduling, temperature control and environmental monitoring along with complete electrical usage monitoring and reporting. The PSC contains all on-board firmware, clock and memory for complete stand-alone operation, and does not rely on a system controller for operation.
BCS BASYX RFC
The BASYX RFC controller is a product developed for heat pumps, fan coil units, lighting and other application specific equipment. The RFC may be incorporated into a full direct digital control system with other BASYX controllers through a data bus cable connection. An on-board socket allows installation of an optional plug-in module for wireless data bus communications between controllers, eliminating the costly installation of hard-wired cables.
The BASYX RFW controller is a product developed for heat pumps, fan coil units, lighting and other application specific equipment. The RFW utilizes “Zigbee” wireless technology for data bus communications between controllers, eliminating the costly installation of hard-wired cables. The RFW may be incorporated into a full direct digital control system with other BASYX controllers through a data bus cable connection.
BCS BASYX VAV
The BASYX VAV assembly provides direct digital control of pressure-independent variable air volume boxes. The VAV unit is a fully assembled controller/actuator combination, and includes a differential pressure sensor for accurate monitoring and control of air flow at very low volumes. The unit controls through a sophisticated PID algorithm which constantly resets air flow requirements by space temperature, thus eliminating constant damper hunting typical of temperature only control units.
BCS BASYX VVR
The BASYX VVR controller provides direct digital control of pressure-independent variable air volume boxes. The VVR is a snap-track mounted controller used for retrofit projects where existing 3-wire floating motors are available, and includes a differential pressure sensor for accurate monitoring and control of air flow at very low volumes. The unit controls through a sophisticated PID algorithm which constantly resets air flow requirements by space temperature, thus eliminating constant damper hunting typical of temperature only control units.
BCS BASYX IPM
The BASYX IPM is a stand-alone board which provides remote intranet/internet access to any BASYX system. The BASYX IPM is programmed through a simple setup program for assignment of IP addresses for connection to building networks.
BCS BASYX IPR
The BASYX IPR is a stand-alone repeater board which provides channel expansion of the BASYX communications bus. The IPR is installed as an RS485 repeater in systems which require multiple loops (channels) or extensive comm bus length. The BASYX IPR requires no programming or address, setup, and works withing the standard 255 total controller configuration.
BASYX/M Series Product Catalog
We present the BASYX/M Series controllers for small to medium convenience stores, retail, food service and other commercial applications. The M series is a family of application specific controllers intended to ease system design and reduce installation cost through complete system packages, all you need is one box. The BASYX/M is based upon our standard line of DDC controls, and provides full system benefits at a competitive price.
BCS BASYX/M-INT Integrator
The BASYX/M-INT Integrator is the primary controller in our modular control systems package. The unit provides all access with the system through the built-in modem, internet module and direct computer connection. An outdoor air temperature sensor is provided for global control of system functions.
BCS BASYX/M-HVC Heating & Air Conditioning Controller
The BASYX/M-HVC is an HVAC controller in our modular control systems package. The unit provides all control and monitoring of any standard rooftop or split system heating and air conditioning unit. The package includes one room temperature sensor with setpoint adjustment and override and one supply air temperature sensor.
BCS BASYX/M-HPC Heat Pump Controller
The BASYX/M-HPC is a heat pump controller in our modular control systems package. The unit provides all control and monitoring of any rooftop or split system heat pump unit. The package includes one room temperature sensor with setpoint adjustment and override and one supply air temperature sensor.
BCS BASYX/M-RFG Refrigeraton Controller
The BASYX/M-RFG is a refrigeration system controller for our modular control systems package. The unit provides complete control of coolers and freezers, and includes four refrigeration bulb sensors and four SPDT control relays. Redundant control is provided by the system by interfacing with existing cooler/freezer controls.
BCS BASYX LC8-R
The BASYX LC8-R is a stand-alone lighting control system which provides basic time-of-day scheduling, along with light level sensor control for proper operation of outdoor lighting. The system contains all on-board firmware, clock and memory for complete stand-alone operation, and does not rely on a central system controller for operation.
BCS BASYX LC5
The BASYX LC5 is a stand-alone lighting control system specifically designed for the convenience store, small retail, parking lot and other markets. The system provides basic time-of-day scheduling, along with light sensor control for proper operation of outdoor lighting. The system contains all on-board firmware, clock and memory for complete stand-alone operation, and does not rely on a central system controller for operation.
Tenant Override and Billing System
BCS TIMEWATCH TWC
The TimeWatch TWC tenant override and billing system is a stand-alone unit which will interface to virtually any building control system marketed today. The TimeWatch provides complete override control through a voice-prompted telephone interface, which can be accessed from any touch-tone telephone. Time clock function provides time-of-day and holiday schedules for up to 248 individual loads.
BCS TIMEWATCH TWC Configuration Overview
The TimeWatch system may be installed as a stand-alone system in various configurations to meet the individual requirements of your facility.
Interface Devices
The 485-25 EPS Converter cable allows connection to the BASYX system through the RS485 communications bus.
The US232 converter cable provides connection to the BASYX system via a laptop or personal computer USB port.
The 485-RPT is a communications repeater, and is required on the 485 data bus on BASYX systems containing more than 32 BASYX series controllers.
The STICK allows connection of the BASYX control system through existing telephone lines.
The AD-2001 is an automatic alarm notification device for contact to service personnel upon a system alarm.